In the latter part of the 1990's, a Nissan Propane Forklift would have cost roughly $11,000 to $14,000 to purchase a brand new one. You are now able to purchase a second-hand model with this amount, with fewer than 5,000 operating hours and has approximately 15 feet of lifting capacity and cushion tires. However, a used Nissan forklift truck which has less than 5,000 hours could be found for less than $7,000. This alternative might be a little bit of an older unit than some others, but remember; everything revolves around the operating hours. A model like this would most likely have a pretty good load capacity of about 5,000 lbs.
Newer Nissan forklifts from the year 2005 to the current year, can be found priced near $10,000. Typically, these models would have a typical lift capacity ranging from 4,000 to 5,000 lbs. Usually, a unit like this would run smoothly and have cushion tires. Of course, newer models generally run smoother compared to older ones.
Kinds of Forklifts
The forklift is normally categorized in 2 separate manners: by the structure of the lift truck and the kind of fuel it takes. Based on structure, the following kinds of lift trucks are amongst the most common:
Standard Forklift: Standard forklifts comprise the familiar warehouse forklift. These forklifts provide a lifting capacity of 3,000 to 5,000 lbs. They have a height capacity of approximately 20 feet.
Reach Forklift: The narrow aisle forklift and reach forklift are the kind of forklifts found within warehouses and distribution centers that have limited storage space. Narrow construction means that it could not lift as much as a standard lift truck unit, although, it has an extendable mast which can easily lift loads about 40 feet.
Telescopic Forklift: The telescopic lift truck is also known as a telehandler, or a telescopic handler or sometimes even an extendable reach forklift. These machinery are more heavy duty and more rugged compared to the conventional forklift. These units offer a telescopic boom that is capable of being raised up and extended out. Normally, these units are utilized on rough terrain. They could handle loads up to 70 feet high and could move loads weighing more than 30,000 lbs. handle loads up to 70 feet high
Straight Mast Forklift: Straight mast lift trucks are also usually used in rough terrain applications. These types of forklifts are only capable of moving loads vertically, not like a telescopic unit. These models could reach a height of 10 to 30 feet, while raising loads up to 12,000 pounds.
|
|
